CLICK HERE FOR FREE BLOGGER TEMPLATES, LINK BUTTONS AND MORE! »

Monday, November 14, 2011

I am so grateful....

Thanksgiving is coming up, and this week for H2H Challenges we are asked to create a project for someone we are thankful for. Knowing that shortly behind Thanksgiving comes Christmas, I decided to create a gift to give away. The recipient of this gift is not on the internet all that much, and I would be surprised if she knew how to navigate to my blog even if she was on the internet, so I feel pretty confident posting it here. :-0)

One of the people I am most thankful for in my life is my mom. You can read a blog post ---> here to see how she inspires me. I am thankful every day that I still have my mom around, and that God chose her to be my mother. We live over 12 hours away from each other, but she is my best friend.

My mom loves to drink iced tea, and she is rarely seen at home without a tall glass, filled with lots of ice and her favorite tea. I decided to make her some coasters to use (those iced tea glasses sweat a lot!!). Here is a picture of my tiles:

I created a little box to put them in, and wrapped them up in some pretty ribbon. Read on for a quick tutorial on how to make your own. Here is what you need:
First, start with some unfinished tiles. I got mine at Home Depot, and the box says Travertine 4x4 tiles.  I found them in the do-it-yourself tiling section.  I think they cost around $5.50, for 9 tiles.  You will also need some Staz-On ink, and whatever stamps you'd like to create with.

Wipe any excess dust off of your tiles with a damp paper towel. Then, simply stamp your images directly on the tile, using Staz-On ink. This ink is specifically formulated to use on non-porous surfaces (tile, glass, metal), and is great to have around if you plan on doing any altered art projects. It will definitely stain your acrylic stamps, but they will still work, so don't be alarmed! I do keep some Staz-On cleaner on my craft table, so I can wipe off my stamps after I use them. That minimizes some of the staining.
(I don't know why my picture is loading sideways...it looks normal when I try to upload it, but it shows up sideways. Sorry. I'll try and go back and fix it later.)

Once I've stamped my tiles, I like to give them a quick shot of hot air with my heat gun. Some people like to put them in the oven and bake them for a few minutes, but I'm too lazy to go downstairs to the kitchen. :-) I've never had any problems with the ink smearing after I've set it with the heat gun, so I guess I'll continue to do it that way....

You will want to put some sort of protective covering on the back of the tile once it's stamped. I use plain old fun foam (available at any big box craft store...for cheap!), but you can also use felt pads, or cork. I cut my fun foam a little smaller than my tile and use Liquid Glass to adhere it to the back.

The next step is to make something pretty to put them in.  I designed a box that uses a 12x12 sheet of cardstock or patterned paper.  First, score it at 2", 4", 8" and 10".  Then turn it 90 degrees, and score it again at 2", 4", 8" and 10".  Then use the following picture to cut it:  the solid lines are cut lines, and the dotted lines are score lines:
Once you've cut the cardstock, this is what it should look like (I've added some patterned paper for decoration):
Flip your cardstock over so that your patterned paper is face down.  It would be so much easier to describe the next few steps if I had remembered to label the flaps, but I'll do the best I can.  Stay with me here, folks.  :-)
The longer piece at the bottom of this picture (the one my thumb is on) is going to be folded over the skinnier piece in the middle.

This picture was taken after I had folded two sides.  You can see on the third side how the skinny flap gets folded at a 90 degree angle.  The score line on the longer flap will go over the top of that skinny flap when it it is folded.
And here is the finished product.  Please feel free to email me if you have any questions.  I know these directions are less than stellar.  But it really is an easy box to make, and believe it or not, there is no adhesive involved!  :-)

Now it's your turn to show us who you are grateful for right now.  Use your creativity (and your Close To My Heart products!) and make something special just for that person.  Don't forget to link it up at the H2H blog for your chance to win some awesome prizes!

Thanks for stopping by, and Happy Crafting!



3 comments:

  1. Great gift project and thanks for sharing the instructions for the coasters AND the box! =)

    ReplyDelete
  2. Such a sweet gift for a sweet lady! I haven't seen this kind of box before (no adhesive!) so thanks especially for sharing the directions. I'm sure she'll love her thoughtful gift.

    ReplyDelete
  3. How long do you run the heat gun over them and how close do you hold it to them? I'm not familiar with heat guns. Thanks!

    ReplyDelete